
Specifications
VJ-1617H Specifications
Model Name | VJ-1617H | |
---|---|---|
Printer Technology | Drop-on-demand Micro Piezo Inkjet Technology | |
Print Head | 1 | |
Head Heights | Automatic | |
Max. Media Width | 1625mm | |
Max. Print Width | 1615mm | |
Max. Media Thickness | 15mm | |
Roll Media Measurements* | φ150mm/ 2" & 3" / 30kg or less | |
Rigid Media Measurements | Maximum length: 1200mm, Minimum length: 200mm / 15kg or less | |
Ink Type | Bio-based Multi-Purpose ink (MP11 ink) | |
Ink Colors | KCMY – 4 colors x 2, KCMY+white | |
Ink Volume | KCMY: 950ml bag, White: 500ml bag (Need dedicated adapters) | |
Print Resolutions | 1440/1080/720dpi (6 modes as standard + 18 modes as custom**) | |
Interface | Ethernet (10 Base-T/100 Base-TX) | |
Heater Control System | "Equipped with blower heater Full width 64"" air knife Temperature range: 65° - 75° - 85°C (air temp) Typical media surface temperature : 50 °C or lower" |
|
Power Supply | AC 100-240V - 60/50 Hz | |
A-property Acoustic Power Level (Actual Measured Value) | 64.8dB or less | |
Printer Accuracy Guaranteed Environment | Temperature: 22~28℃ Humidity: 40~60%RH (Non Condensing) | |
Power Consumption | Operating Status: 300W or less, In standby: 40W or less Blower Heater:2200W or less, In standby: 25W or less |
|
Machine Measurements | W 2698 x D 818 x H 1302 mm | |
Machine Measurements with media feeding table (option) | W 2698 x D 2486 x H 1302 mm | |
Packing Size | W2880 x D1150 x H850mm, Weight: 266.5kg | |
Media feeding table F/R: W 1770 x D 1160 x H 215mm, Weight: 57kg | ||
W2245 x D395 x H250mm, Weight: 36kg | ||
Take-up unit: W 2555 x D 316 x H 286mm, Weight: 13.4kg | ||
Main Unit Weight | Printer: 167.5kg Stand: 33kg Table: 43kg Take-up system: 18kg | |
Option | Take-up system VJ-16 TUP30 (30kg) | |
Media feeding table for rigid media | ||
Media support | ||
High capacity ink pack adapter VJ-HCIPADPT |
*Due to the removal of the flange joint, the 2-inch media core can be adjusted; however, do not use the solid 2-inch core media.
**Custom modes are set by the RIP software. For the details, please contact your authorized dealer.
**Custom modes are set by the RIP software. For the details, please contact your authorized dealer.